Well, there is my second camera which I’ve completely overhauled and I’m very happy with my achievement.
My journey of learning just got to a next level, particularly with the process of reassembly. As I am taking pictures of every single step before and after I remove parts, one should believe that reversing the process will swiftly bring you back to the original state, right? Yeah, not really. Here some of the “pains” I’ve been suffering from today:
- Aperture blades: it took 4 attempts to bring it all together, mainly because one blade being particularly stubborn to stay in its position. So try, fail and repeat until success. At one stage, I’ve been forgetting to mount the guide-disk:
- Putting things together without checking the details: the lever for the flashynchro setting was not completely in place so the whole shutter assembly was slightly misaligned
- It took me a lot of trial and error to put back the front plate to the body so it did well align with the rewind mechanism
- I yet need to set the focus correctly on the front lens but to do so, I’ll need a ground glass to simulate the film plane. That’ll be another tool on my ever growing list 🙂
All-in-all, I am confident to get better by every camera, even if there will be some drawbacks. My personal tip for all those seeking for an easy way to clean brass and copper is to use a q-tip with some Sigolin Standard or similar and the rub it off with clean q-tip. I’ve used this to clean the copper and messing shims.